圣霖国际联接机选购点击了解更多,圣霖国际用心服务

轴毂联接的方式有键联接、花键联接、成形联接、胀套联接、销联接、紧定螺钉联接、过盈联接等，有些联接方式仅用于轴毂联接，有些联接方式可兼作其它联接。键和花键是常见的轴毂联接方式。

The way of shaft hub connection includes key connection, spline connection, forming connection, expansion sleeve connection, pin connection, tight screw connection and interference fit. Some connection ways are only used for hub connection, and some connection ways can be used as other connecti. Key and spline are the most common hub connecti. 楔键联接：键的上下两表面是工作面，键的上表面和轮毂键槽底面均有1∶100的斜度，装配后，键即楔紧在轴和轮毂的键槽里，工作表面产生很大预紧力。

Wedge key connection: the upper and lower two surfaces of the key are the working faces. The upper surface of the key and the bottom of the hub keyway have 1 to 100 slope. After assembly, the key is wedged tightly in the keyway of the shaft and hub, and the working surface has a large pre tightening force. 花键联接由内花键和外花键组成。内、外花键均为多齿零件，在内圆柱表面上的花键为内花键，在外圆柱表面上的花键为外花键。显然，花键联接是平键联接在数目上的发展。

The connection of the spline is made up of the inner and outer spline. The inner and outer spline are multi tooth parts, and the spline on the surface of the inner cylinder is the inner spline, and the spline on the outer cylindrical surface is the outer spline. It is that the spline connection is the development of the number of flat bond connecti. 机用虎钳结构缺点及使用中的隐患。机用虎钳有结构简单、夹紧力大、操作和维护方便等特点。但由于其必须具有广泛的适用性和操作的便捷性，其螺母与丝杆之间、活动座与虎钳体之间存在着较大的配合间隙，导致在装夹一些加工精度要求较高的产品时难以达到要求。

The structural shortcomings of the machine vise and the hidden danger in the use. The machine tool has the characteristics of simple structure, large clamping force, easy operation and maintenance. But because of its wide applicability and convenient operation, there is a large gap between the nut and the screw rod, the movable seat and the vice body, which results in the difficulty of meeting some re when clamping some products with high machining accuracy.